Here’s a SayPro Audit Report Template that auditors can use to document their findings, including areas of non-compliance. This template can be customized based on your specific audit needs.

---

SayPro Health and Safety Audit Report

Audit Report No.: ___________________
Audit Date: ___________________
Facility/Location: ___________________
Department/Area Audited: ___________________
Auditor(s): ___________________
Audit Supervisor/Manager: ___________________

1. Executive Summary

This section provides a high-level summary of the audit, including an overview of the findings, overall compliance status, and the key areas of concern identified during the audit.

• Audit Objective:
  • Evaluate compliance with SayPro’s health and safety policies and procedures.
• Audit Scope:
  • The audit covers all aspects of health and safety practices, including fire safety, PPE usage, emergency exits, sanitation, and hazardous materials management.
• Overall Compliance Rating (Scale 1–5):
  • 1 – Non-compliant
  • 2 – Partially compliant
  • 3 – Compliant with minor issues
  • 4 – Mostly compliant with few issues
  • 5 – Fully compliant
• Key Findings:
  • [Briefly summarize key findings and any areas of concern identified during the audit.]

---

2. Detailed Findings and Areas of Non-Compliance

This section includes the detailed audit findings, categorized by topic. For each area, the compliance status is noted, along with any non-compliance issues, recommendations for corrective actions, and deadlines for compliance.

Category	Findings	Compliance Status	Non-Compliance/Concerns	Recommended Action	Deadline for Action
Fire Safety	Fire extinguishers in place, but not fully accessible.	[ ] Compliant [ ] Non-Compliant	Fire extinguishers blocked by equipment.	Relocate fire extinguishers to accessible areas.	[Insert Deadline]
Personal Protective Equipment (PPE)	PPE is available but not always used consistently.	[ ] Compliant [ ] Non-Compliant	Employees not wearing gloves in high-risk areas.	Reinforce PPE policy through training.	[Insert Deadline]
Sanitation and Hygiene	Restrooms are clean and well-stocked.	[ ] Compliant [ ] Non-Compliant	Waste bins in some areas are overflowing.	Improve waste disposal practices and schedule more frequent pickups.	[Insert Deadline]
Emergency Exits	Emergency exit routes are clearly marked.	[ ] Compliant [ ] Non-Compliant	One emergency exit sign not illuminated.	Replace the faulty exit sign and check all lighting.	[Insert Deadline]
Health Facilities	First aid kits available and properly stocked.	[ ] Compliant [ ] Non-Compliant	First aid kits missing some required items.	Restock first aid kits with missing supplies.	[Insert Deadline]
Electrical Safety	Electrical wiring appears in good condition.	[ ] Compliant [ ] Non-Compliant	Exposed wiring near wet areas.	Isolate the wiring from wet zones and provide proper covering.	[Insert Deadline]
Hazardous Materials	Chemical storage is organized and labeled.	[ ] Compliant [ ] Non-Compliant	SDS (Safety Data Sheets) not available for some chemicals.	Ensure all chemicals have accessible SDS.	[Insert Deadline]
Workplace Ergonomics	Workstations adjusted for comfort.	[ ] Compliant [ ] Non-Compliant	No ergonomic adjustments for employees working in high-stress environments.	Provide ergonomic chairs and desks in high-risk areas.	[Insert Deadline]

---

3. Non-Compliance Summary

In this section, summarize the key areas of non-compliance identified during the audit. Be specific about each finding and its potential impact on employee safety and health.

• Non-Compliant Areas Identified:
  1. Fire Safety – Fire extinguishers were found to be obstructed by equipment, potentially delaying access in the event of an emergency.
  2. PPE Usage – Inconsistent usage of gloves in high-risk areas (e.g., handling chemicals).
  3. Sanitation – Overflowing waste bins in certain areas indicate inadequate waste disposal practices.
  4. Emergency Exits – Emergency exit signage not illuminated, which could impede evacuation during an emergency.
  5. Electrical Safety – Exposed electrical wiring near wet areas could present a risk of electrocution.

---

4. Corrective Actions and Recommendations

Based on the findings, provide clear, actionable recommendations to resolve the areas of non-compliance.

• Fire Safety: Relocate fire extinguishers to ensure they are easily accessible in all work areas. Conduct a fire drill to reinforce evacuation procedures.
• PPE Usage: Provide additional PPE training, emphasizing the importance of consistent usage. Regular checks should be conducted to ensure compliance.
• Sanitation: Increase the frequency of waste disposal services to prevent overflow. Ensure that sanitation staff are regularly inspecting and addressing waste issues.
• Emergency Exits: Replace faulty exit signs immediately and ensure all exit routes are properly illuminated.
• Electrical Safety: Isolate electrical wiring from wet areas and ensure it is properly covered to prevent any electrical hazards.
• Hazardous Materials: Ensure all chemicals have corresponding Safety Data Sheets (SDS) readily available, and that employees are trained in their proper handling.

---

5. Follow-Up and Monitoring

Outline how the corrective actions will be followed up and monitored to ensure compliance. This section may include scheduling follow-up inspections, appointing responsible individuals for corrective actions, and any deadlines for resolution.

• Responsible Person(s):
  • [Insert names or departments responsible for implementing corrective actions]
• Follow-Up Audit Date:
  • [Insert date for follow-up audit to assess the implementation of corrective actions]
• Monitoring Plan:
  • [Provide details of how corrective actions will be monitored, e.g., through inspections, training, or reporting]

---

6. Conclusion

This section summarizes the overall compliance status based on the audit findings, the significance of non-compliance issues, and the potential risks to health and safety. It should also note the expected improvements following the implementation of corrective actions.

• Overall Compliance Status:
  • [Insert rating or summary of compliance]
• Next Steps:
  • Implement corrective actions as detailed above.
  • Conduct follow-up audits to ensure resolution of non-compliance issues.
  • Reinforce safety training programs to prevent future non-compliance.

---

Auditor’s Signature: ___________________
Date: ___________________
Audit Supervisor’s Signature: ___________________
Date: ___________________

---

This template ensures a thorough documentation of audit findings, areas of non-compliance, and the corrective actions needed to resolve safety issues. It also helps track progress over time by setting deadlines and follow-up audits. Let me know if you need further customization or additional sections!